The DumpMate combines powered travel with high-dump capability, so crews can move material and unload it without relying on manual wheelbarrows or larger construction equipment. DumpMate has the power and control to move up to 1,110 lbs. of concrete, debris and other heavy material through tight jobsites. A 51-inch dump height makes it easier to unload into dumpsters, forms and other raised areas. Variable-speed controls and a compact walk-behind design give operators more control when working in confined spaces or around finished surfaces.
Why Choose the DumpMate?
High-Dump Reach
DumpMate's 51-inch dump height allows material to be unloaded into standard roll-off dumpsters and concrete forms without additional handling.
Compact Access
At 31.5 inches wide, DumpMate can travel through standard doorways, hallways and other narrow access points where larger equipment may not fit.
Electric Operation
A electric drive eliminates engine exhaust and reduces operating noise compared with gas-powered equipment. The onboard charger connects to a standard 110V outlet.
Built for the Jobsite
Variable speed control, ergonomic walk-behind operation and low ground pressure give operators control when moving heavy loads across any surface.
DumpMate - Specifications & Dimensions
- Payload Capacity: 1,100 lbs.
- Load Volume: .33 yd³
- Motor: 24V electric
- Battery: 2.7 kWh rechargeable
- Runtime: 8 hours per charge
- Travel Speed: 0-4 MPH, variable
- Controls: Ergonomic, walk-behind controls
- Dump Height: 51"
- Ground Pressure: 9.6 PSI
- Service Weight: 970 lbs.
- Warranty: 1 Year
- Onboard battery charger
- Charges from a standard 100V outlet
- Approx. 4-5 hour charge time
- Electric operation with no engine exhaust
- Suitable for indoor and outdoor use
- Compact design for narrow access points
70.5” L x 31.5” W x 38.6" H
51" Dump Height
Contact Us to discuss your custom needs.
Common Questions About The DumpMate
Not sure if the DumpMate is right for you? Contact us with any questions, or review some of the commonly asked questions below:
The DumpMate is designed to move concrete, construction debris, masonry material and other heavy loads. It can be used for concrete work, renovation, demolition, roofing and similar material-moving applications.
The DumpMate has an approximate payload capacity of 1,110 lbs. and a load volume of approximately 0.33 cubic yards.
The DumpMate has a 51-inch dump height and is designed to clear standard roll-off dumpster walls and concrete forms.
Yes. The DumpMate is 31.5 inches wide, which allows it to fit through standard doorways and many narrow interior access points.
Yes. The DumpMate uses a battery-powered electric drive with no engine exhaust and is rated for indoor and outdoor use.
The DumpMate provides up to approximately 8 hours of runtime per charge. Recharge time is approximately 4 to 5 hours using a standard 110V outlet.
Get in Touch - PowerPusher®
Want to learn more about our material-handling equipment? We’d love to have our engineering & sales team get in touch with you to find a solution for your load-moving needs. Build a quote, request a demo, or fill out the form below and a member of our team will be in touch with you!